Skip to content
Aperlena
Language:

Denmark - Laboratory, optical and precision equipment (excluding glasses) - Purchase of a new VHP pass through decontamination chamber

Original Denmark - Laboratory, optical and precision equipments (excl. glasses) - Purchase of a new VHP pass through decontamination chamber

Open Contract notice No deadline published
Watch this tender

We email you if the deadline moves or a correction is published. Free. Log in

Summary

Machine-generated summary

Statens Serum Institute (SSI) in Denmark invites tenders for the purchase and installation of a new VHP pass through decontamination chamber, including all supporting units, systems and VHP generator, to replace the current chamber used for surface decontamination of heat sensitive items from BSL 3 areas. SSI will handle removal and disposal of the existing chamber and seal the new unit to the structural opening. The supplier must transport, install and test the chamber, confirming airtightness. Requirements are detailed in Appendices 2 and 2.1 to 2.6.

Description

This procurement procedure concerns the award of a Contract regarding the purchase and installation of a VHP pass through decontamination chamber at Statens Serum Institute, Denmark (hereafter noted as SSI). The specification of requirements is found in Appendices 2, 2.1 - 2.6. - SSI conducts research in infectious diseases by in vivo testing primarily in rodents, requiring containment measures for biosafety level (BSL) 3 and “Genetically Modified Organism” GMO class 1-2. In accordance with local and international guidelines on biosafety containment, materials and equipment for reuse, and contaminated waste, must be decontaminated before removal from the building. - In this dedicated building (hereafter noted as BXX), o contaminated waste and reusable non-heat sensitive items from the BSL 3 area, are decontaminated via a pass-through autoclave using saturated steam before removal. o surface decontamination of reusable heat sensitive items from BSL 3 is via an airtight pass-through chamber using VHP as a decontaminant before removal. - The current chamber in the dedicated building which is in use for the surface VHP decontamination of different heat sensitive loads shall be replaced with a new VHP pass-through decontamination chamber inclusive of all supporting units/system/VHP generator. - After decontamination of the BSL3 area where the VHP-chamber is located, SSI will establish an airtight dust wall, allowing for installation and testing of the new VHP-unit in a declassified area. Furthermore, SSI will ensure removal and disposal of the current VHP-chamber in its entirety and including the current rack system. - The Vendor shall ensure transportation of the VHP chamber to the allocated place, and after installation confirm that the replacement VHP pass-through decontamination chamber has maintained airtightness. - The airtight VHP decontamination chamber will be sealed by SSI to the structural opening in the Arcoplast® with an FDA approved silicon (joint compound) to achieve an airtight barrier around the VHP decontamination chamber between the BSL3 and BSL2 areas. See Appendix 2, page 2. - A project plan for manufacture, Factory Acceptance Test (FAT), transportation, installation, sealing, airtightness control, Site Acceptance Test (SAT), test procedures (Installation Qualification (IQ) and Operational Qualification (OQ) and cycle development shall be included in the Offer. Sealing and airtightness control shall be included in the project plan even though it will be implemented by SSI. - Please see Appendix 2 for specification of Load Fractions and be aware of the possibility to submit Parallel Offers, cf. Tender Conditions section 5.4 with and without Load Fraction 13.

Official source

Source: TED - Tenders Electronic Daily (Publications Office of the EU)

Always verify details on the official notice.

Last verified against TED - Tenders Electronic Daily (Publications Office of the EU) 1 month ago

View the official notice

More from this buyer

Full buyer profile

4 open tenders right now

This buyer has no award history in this sector yet. Usual winners, Laboratory & precision equipment - Denmark

Company Wins Total awarded Last win
Roche Diagnostics A/S 6 €23.3M Jul 2026
TRIOLAB A/S 6 €4.6M May 2026
Bruker Nordic AB 4 €1.4M Aug 2026
Axlab A/S 3 €2.8M Aug 2026
Thermo Electron A/S 3 €1.8M Aug 2026

Based on 106 awards with a linked company profile over the last 2 years.

Change history

Every time an official source republished this notice with different content. We watch every source we index, including regional copies of the same notice.

  1. Read before bidding
    • Estimated value: Set to €601,974
    • Estimated value: Set to €4,500,000

Follow this tender and we email you the moment it changes. Create account

Similar tenders

Market context

Avg. open tender · Laboratory & precision equipment
€5,559,298
2,022 open across Europe right now 89% below sector average
Buyer track record on Aperlena
11 notices tracked · 4 awarded

Never miss a tender like this

12 new notices in Laboratory & precision equipment in Denmark in the last 7 days. Get an email when new ones appear. Free.

Set up my alert
Source

Keyboard shortcuts

Read a list without reaching for the mouse. The shortcuts stay quiet while you type in a field.

j
Next result
k
Previous result
Enter
Open the result
n
Next page
p
Previous page
c
Compare this result
s
Shortlist this result
/
Jump to the search box
?
Show these shortcuts
Esc
Close