Aller au contenu
Aperlena

Danemark - Équipements de laboratoire, d'optique et de précision (hors lunettes) - Acquisition d'une nouvelle chambre de décontamination à sas VHP

Original Denmark - Laboratory, optical and precision equipments (excl. glasses) - Purchase of a new VHP pass through decontamination chamber

Ouvert Avis de marché Aucune date limite publiée
Suivre ce marché

Nous vous écrivons si la date limite change ou si un rectificatif est publié. Gratuit. Se connecter

Résumé

Résumé généré automatiquement

Le Statens Serum Institute (SSI) au Danemark lance un appel d'offres pour l'achat et l'installation d'une nouvelle chambre de décontamination à sas VHP, incluant toutes les unités, systèmes de soutien et le générateur VHP, afin de remplacer la chambre actuelle utilisée pour la décontamination de surface d'articles sensibles à la chaleur provenant de zones BSL 3. Le SSI assurera l'élimination de l'ancienne chambre et l'étanchéité de la nouvelle unité à l'ouverture structurelle. Le fournisseur doit transporter, installer et tester la chambre, en confirmant l'étanchéité. Les exigences figurent dans les annexes 2 et 2.1 à 2.6. Ni valeur estimée ni date limite de remise des offres ne sont indiquées.

Description

This procurement procedure concerns the award of a Contract regarding the purchase and installation of a VHP pass through decontamination chamber at Statens Serum Institute, Denmark (hereafter noted as SSI). The specification of requirements is found in Appendices 2, 2.1 - 2.6. - SSI conducts research in infectious diseases by in vivo testing primarily in rodents, requiring containment measures for biosafety level (BSL) 3 and “Genetically Modified Organism” GMO class 1-2. In accordance with local and international guidelines on biosafety containment, materials and equipment for reuse, and contaminated waste, must be decontaminated before removal from the building. - In this dedicated building (hereafter noted as BXX), o contaminated waste and reusable non-heat sensitive items from the BSL 3 area, are decontaminated via a pass-through autoclave using saturated steam before removal. o surface decontamination of reusable heat sensitive items from BSL 3 is via an airtight pass-through chamber using VHP as a decontaminant before removal. - The current chamber in the dedicated building which is in use for the surface VHP decontamination of different heat sensitive loads shall be replaced with a new VHP pass-through decontamination chamber inclusive of all supporting units/system/VHP generator. - After decontamination of the BSL3 area where the VHP-chamber is located, SSI will establish an airtight dust wall, allowing for installation and testing of the new VHP-unit in a declassified area. Furthermore, SSI will ensure removal and disposal of the current VHP-chamber in its entirety and including the current rack system. - The Vendor shall ensure transportation of the VHP chamber to the allocated place, and after installation confirm that the replacement VHP pass-through decontamination chamber has maintained airtightness. - The airtight VHP decontamination chamber will be sealed by SSI to the structural opening in the Arcoplast® with an FDA approved silicon (joint compound) to achieve an airtight barrier around the VHP decontamination chamber between the BSL3 and BSL2 areas. See Appendix 2, page 2. - A project plan for manufacture, Factory Acceptance Test (FAT), transportation, installation, sealing, airtightness control, Site Acceptance Test (SAT), test procedures (Installation Qualification (IQ) and Operational Qualification (OQ) and cycle development shall be included in the Offer. Sealing and airtightness control shall be included in the project plan even though it will be implemented by SSI. - Please see Appendix 2 for specification of Load Fractions and be aware of the possibility to submit Parallel Offers, cf. Tender Conditions section 5.4 with and without Load Fraction 13.

Source officielle

Source : TED - Tenders Electronic Daily (Publications Office of the EU)

Vérifiez toujours les détails dans l'avis officiel.

Dernière vérification auprès de TED - Tenders Electronic Daily (Publications Office of the EU) il y a 1 mois

Plus de cet acheteur

Profil complet de l'acheteur

4 marchés ouverts actuellement

Cet acheteur n'a encore aucune attribution enregistrée dans ce secteur. Attributaires habituels, Équipements de laboratoire & de précision - Danemark

Entreprise Attributions Montant total attribué Dernière attribution
Roche Diagnostics A/S 6 €23,3M juil. 2026
TRIOLAB A/S 6 €4,6M mai 2026
Bruker Nordic AB 4 €1,4M août 2026
Axlab A/S 3 €2,8M août 2026
Thermo Electron A/S 3 €1,8M août 2026

Sur la base de 104 attributions avec un profil d'entreprise associé au cours des 2 dernières années.

Historique des modifications

Chaque republication de cet avis par une source officielle avec un contenu différent. Nous surveillons toutes les sources que nous indexons, y compris les copies régionales du même avis.

  1. A lire avant de repondre
    • Valeur estimée: Fixé à 601 974 €
    • Valeur estimée: Fixé à 4 500 000 €

Suivez ce marche et nous vous ecrivons dès qu'il change. Créer un compte

Marchés similaires

Contexte de marché

Appel ouvert moyen · Équipements de laboratoire & de précision
5 484 860 €
2 038 ouverts en Europe actuellement 89% en dessous de la moyenne du secteur
Historique de l'acheteur sur Aperlena
11 avis suivis · 4 attribués

Ne manquez plus aucun marché comme celui-ci

12 nouveaux avis pour Équipements de laboratoire & de précision en Danemark au cours des 7 derniers jours. Recevez un e-mail quand de nouveaux avis paraissent. Gratuit.

Créer mon alerte

Raccourcis clavier

Parcourir une liste sans toucher la souris. Les raccourcis restent inactifs pendant la saisie dans un champ.

j
Résultat suivant
k
Résultat précédent
Entrée
Ouvrir le résultat
n
Page suivante
p
Page précédente
c
Comparer ce résultat
s
Ajouter ce résultat à la présélection
/
Aller au champ de recherche
?
Afficher ces raccourcis
Échap
Fermer