Notices of this kind (Poland, below the EU threshold) give a median of 12 days, half of them between 8 and 15 days, based on 93,417 notices of the last two years.
Fewer days than three in four comparable notices. Check the documents early and ask questions before the clarification deadline.
This buyer usually gives 9 days (median of its last 124 calls for tender).
It extended the deadline on 1 of the 10 calls we followed from publication (10%).
Supply of thermomixers, centrifuges and microcentrifuges for the Tissue Bank of PUM
Buyer: Pomorski Uniwersytet Medyczny w Szczecinie
Country: Poland
Deadline: 16 Oct 2026, 10:00 (UTC+2)
Procedure: Other procedure
Sector (CPV): Industrial machinery (42931000)
Aperlena: https://aperlena.com/en/t/dostawa-termomikserow-wirowek-i-mikrowirowek-dla-banku-tkanek-pum-4bcc5c5005
Official notice: https://ezamowienia.gov.pl/mo-client-board/bzp/notice-details/2026%2FBZP%2000478609%2F01
If the deadline moves or the notice is corrected, we email you.
Log in
01
Summary
Machine-generated summary
The Pomeranian Medical University in Szczecin is purchasing laboratory equipment for its Tissue Bank: thermomixers, centrifuges and microcentrifuges. The buyer is a public higher education institution located at Rybacka 1, 70-204 Szczecin, West Pomeranian Voivodeship, in the NUTS 3 area PL424, city of Szczecin. The contract is awarded under the basic procedure on the basis of Article 275 point 2 of the Polish Public Procurement Law, with the buyer acting independently. The procurement is not financed from EU funds and is not covered by a procurement plan. The procedure is conducted via an electronic purchasing platform, where documents are made available and communication takes place. Contractors are not restricted to the group referred to in Article 94 of the act.
02
Description
Ogłoszenie nr 2026/BZP 00478609 z dnia 2026-10-08 Ogłoszenie o zamówieniu Dostawy Dostawa termomikserów, wirówek i mikrowirówek dla Banku Tkanek PUM SEKCJA I - ZAMAWIAJĄCY 1.1.) Rola zamawiającego Postępowanie prowadzone jest samodzielnie przez zamawiającego 1.2.) Nazwa zamawiającego: Pomorski Uniwersytet Medyczny w Szczecinie 1.4) Krajowy Numer Identyfikacyjny: REGON 000288886 1.5) Adres zamawiającego 1.5.1.) Ulica: Rybacka 1 1.5.2.) Miejscowość: Szczecin 1.5.3.) Kod pocztowy: 70-204 1.5.4.) Województwo: zachodniopomorskie 1.5.5.) Kraj: Polska 1.5.6.) Lokalizacja NUTS 3: PL424 - Miasto Szczecin 1.5.7.) Numer telefonu: 91 48 00 779 1.5.9.) Adres poczty elektronicznej: przetargi@pum.edu.pl 1.5.10.) Adres strony internetowej zamawiającego: www.pum.edu.pl 1.6.) Rodzaj zamawiającego: Zamawiający publiczny - jednostka sektora finansów publicznych - uczelnia publiczna 1.7.) Przedmiot działalności zamawiającego: Edukacja SEKCJA II - INFORMACJE PODSTAWOWE 2.1.) Ogłoszenie dotyczy: Zamówienia publicznego 2.2.) Ogłoszenie dotyczy usług społecznych i innych szczególnych usług: Nie 2.3.) Nazwa zamówienia albo umowy ramowej: Dostawa termomikserów, wirówek i mikrowirówek dla Banku Tkanek PUM 2.4.) Identyfikator postępowania: ocds-148610-ca7f2024-d8d8-440d-be71-db1f1240c67a 2.5.) Numer ogłoszenia: 2026/BZP 00478609 2.6.) Wersja ogłoszenia: 01 2.7.) Data ogłoszenia: 2026-10-08 2.8.) Zamówienie albo umowa ramowa zostały ujęte w planie postępowań: Nie 2.11.) O udzielenie zamówienia mogą ubiegać się wyłącznie wykonawcy, o których mowa w art. 94 ustawy: Nie 2.14.) Czy zamówienie albo umowa ramowa dotyczy projektu lub programu współfinansowanego ze środków Unii Europejskiej: Nie 2.16.) Tryb udzielenia zamówienia wraz z podstawą prawną Zamówienie udzielane jest w trybie podstawowym na podstawie: art. 275 pkt 2 ustawy SEKCJA III - UDOSTĘPNIANIE DOKUMENTÓW ZAMÓWIENIA I KOMUNIKACJA 3.1.) Adres strony internetowej prowadzonego postępowania https://platformazakupowa.pl/transakcja/1386766 3.2.) Zamawiający zastrzega dostęp do dokumentów zamówienia: Nie 3.4.) Wykonawcy zobowiązani są do składania ofert, wniosków o dopuszczenie do udziału w postępowaniu, oświadczeń oraz innych dokumentów wyłącznie przy użyciu środków komunikacji elektronicznej: Tak 3.5.) Informacje o środkach komunikacji elektronicznej, przy użyciu których zamawiający będzie komunikował się z wykonawcami - adres strony internetowej: 1) Z zastrzeżeniem art. 61 ust. 2 ustawy, komunikacja, odbywa się elektronicznie, wyłącznie za pośrednictwem Platformy Zakupowej; 2) Zamawiający informuje, że będzie przekazywał Wykonawcom oświadczenia, zawiadomienia, wezwania, będzie udostępniał oferty i kierował wszelką korespondencję i dokumenty do Wykonawców za pośrednictwem Platformy Zakupowej, a Wykonawcom nie przysługuje żądanie przekazywania korespondencji za pośrednictwem maila; 3) Wykonawca może komunikować się z Zamawiającym za pośrednictwem Platformy Zakupowej, za pomocą formularza „Wyślij wiadomość do zamawiającego”, z zastrzeżeniem punktu 4); 4) ofertę wraz z załącznikami należy złożyć wyłącznie za pośrednictwem „Formularza”, dostępnego na Platformie Zakupowej, w miejscu publikacji ogłoszenia o zamówieniu i innych dokumentów; 5) Korespondencja przekazana Zamawiającemu w inny sposób, niż opisany w punkcie 3) nie będzie brana pod uwagę; 6) Adres strony internetowej: https://platformazakupowa.pl/transakcja/1386766 3.6.) Wymagania techniczne i organizacyjne dotyczące korespondencji elektronicznej: 1) ofertę i oświadczenia, o którym mowa w art. 125 ust. 1 ustawy Pzp, a także inne dokumenty składane wraz z ofertą przygotowuje się i składa się, pod rygorem nieważności w formie elektronicznej (tj. przy użyciu kwalifikowanego podpisu elektronicznego) lub w postaci elektronicznej, opatrzonej podpisem zaufanym lub podpisanej przy pomocy dowodu osobistego z warstwą elektroniczną (tzw. podpisem osobistym); 2) w celu złożenia oferty Wykonawca może, ale nie musi założyć konto na Platformie Zakupowej. Instrukcja dotycząca rejestracji i logowania dostępna jest pod linkiem: https://platformazakupowa.pl/strona/45-instrukcje; 3) przeglądanie i pobieranie publicznej treści dokumentacji postępowania nie wymaga posiadania konta na Platformie Zakupowej, ani logowania; 4) korzystanie z platformy zakupowej przez Wykonawców jest bezpłatne; 5) za datę wpływu oświadczeń, wniosków, zaświadczeń oraz informacji przyjmuje się datę zapisania plików na serwerze. Aktualna data i godzina, zsynchronizowane z Głównym Urzędem Miar. 6) Zamawiający określa niezbędne wymagania sprzętowo - aplikacyjne umożliwiające pracę na Platformie Zakupowej: a) stały dostęp do sieci Internet o gwarantowanej przepustowości nie mniejszej niż 512kb/s; b) komputer klasy PC lub MAC o następującej konfiguracji: pamięć min. 2 GB RAM, procesor Intel IV 2 GHZ lub jego nowsza wersja, jeden z systemów operacyjnych - MS Windows 7, Mac Os x 10 4, Linux, lub ich nowsze wersje; c) zainstalowana dowolna przeglądarka internetowa, w przypadku Internet
03
Bid or no-bid?
Six questions before you commit a team. Under each one, what the register holds on it. The answers are yours.
Can I bid?
Documents in Polish.
Bids are submitted through e-Zamowienia (ezamowienia.gov.pl).
The buyer has too few awards of its own in this sector, so this is the range of the last 541 awards for Industrial machinery in Poland.
€226€8.4B
Median award
€376,767
Middle half of past awards
€128,952 to €706,407
Biuletyn Zamówień Publicznych (e-Zamówienia, UZP) publishes no value for this notice, so it has no mark on the scale. The official documents may state one.
Award values as published by the official sources. Use them as a guide, not a rule: scope, lots and duration differ between contracts.
of the awards went to the three most frequent winners
12%
of its calls state an estimated value
1%
Based on 165 awards with a named winner over the last 3 years. Counted by award, not by value, because lot and framework amounts are not comparable.
Concentrated means the three most frequent winners took 65% or more of the awards; many suppliers, under 35% with at least ten different winners.
Competition
tenders per lot on average (open and restricted procedures)
1.7
of those lots received a single tender
55%
of the awards went to companies based in another country
3%
As the official award notices state them, over the last 3 years. Tenders per lot count open and restricted procedures only: in a negotiated procedure or a direct award a single tender is the procedure itself. The country is the one the notice gives for the winner.
2025106
202614
One dot per award, on the day it was signed, sized by its value. A ring is an award with no published value.
This buyer has no award history in this sector yet. Usual winners, Industrial machinery - Poland
Biuletyn Zamówień Publicznych (e-Zamówienia, UZP) publishes no value for this notice, so it cannot be placed among the open notices of its sector. The official documents may state one.
open now in Industrial machinery
2,919
median open notice
€250,000
Who wins in this market
Many suppliers
Poland · Industrial machinery
different companies won awards here
830
of the awards went to the three most frequent winners
3%
buyers awarded contracts here
660
Based on 1,108 awards with a named winner over the last 3 years. Counted by award, not by value, because lot and framework amounts are not comparable.
Concentrated means the three most frequent winners took 65% or more of the awards; many suppliers, under 35% with at least ten different winners.
Competition
tenders per lot on average (open and restricted procedures)
2.8
of those lots received a single tender
38%
of the awards went to companies based in another country
6%
of the tenders came from another country
10%
As the official award notices state them, over the last 3 years. Tenders per lot count open and restricted procedures only: in a negotiated procedure or a direct award a single tender is the procedure itself. The country is the one the notice gives for the winner.