North Macedonia - Angiography supplies - Procurement of dispensable material for interventional cardiology - catheters, balloon catheters, wires introducers, inflators, syringes, etc.

The subject of the agreement consists of 84 separate parts Coronary balloon catheters with a narrow profile for ostial, focal, and long lesions, for dilatation within a stent and post-dilatation for CTO, for “side branch access”; Coronary balloon catheters with a narrow profile for focal and long lesions; A coronary microguide catheter; A coronary “Cutting balloon” for distinctly calcified coronary lesions that cannot be dilated with regular balloons; Coronary pre-dilatation balloon catheters for all types of dilatations (including dilatations within stents): “low semi-compliant”; Coronary post-dilatation balloon catheters for all types of dilatations (including dilatations within stents): “non-compliant; Coronary balloon catheters for dilatation and CTO, semicompliant, hydrophilically coated, with a low-profile tip; A hydrophilic guiding introducer with a stainless-steel spiral for enhanced support; A hydrophilic introducer (set) for transradial access; Arterial introducers (set) for femoral arterial access; An extension for guiding catheter ”rapid exchange; GUIDING coronary catheters for transfemoral / transradial access; A device for proximal protection during carotid stenting, compatible with an 8F introducer; Thromboaspiration catheters using the vacuum method; Diagnostic coronary catheters (left and right) with a wide range of curves, compatible with 4-6F; Diagnostic catheters for cervical and cerebral artery access with various SIMMONS curves (1, 2, 3); Hydrophilic angiographic catheters with an internal stainless-steel braid; A coronary hydrophilic workhorse wire 0.014” with high flexibility, made of steel alloy, offering excellent tip response and support, length 190-300 cm; A hydrophilic guide wire for PCI, “Core-to-tip” design, dimension 0.014", for stenotic lesions, offering excellent torque response with smooth transition, available in lengths from 190cm to 300cm, and 4.1 g tip; A coronary guide wire 0.014" for severely tortuous blood vessels and lesions with a high degree of stenosis, with excellent tip response and support, length 190-300 cm, and with a hydrophilic coating; A hydrophilic guide wire for PCI of severely tortuous coronary arteries 0.014", minimum length from 190cm to 300cm, with various degrees of support for stenting; A hydrophilic coronary workhorse guide wire 0.014“,made of steel alloy, highly flexible, with an exceptional atraumatic tip for interventions, length 190-300 cm; A coronary guide wire 0.010", effective for PCI with a retrograde approach; A guide wire for PCI of chronic total occlusions “tapered tip” (0.014"/ 0.010" - 0.36mm/0.26mm), 190-300cm, tip 0.6 g; A guide wire for PCI of chronic total occlusions “tapered tip” (0.014"/ 0.010" - 0.36mm/0.26mm), 190-300cm, tip 1.0 g; A guide wire for coronary blood vessels 0.014", for crossing CTO, hydrophilic, 190-300 cm long and with a length of the coil (spring) of 8.5cm; A coronary guide wire for chronic total occlusions “tapered tip”, 0.010; 0.011; 0.012”, hydrophilic; A guide wire for coronary blood vessels 0.014", for crossing CTO, hydrophilic, 200-300 cm long and with a length of the coil (spring) of 11 cm; Hybrid hydrophilic guide wires; A coronary guide wire 0.014", hydrophilic, with a stainless-steel core, for tortuous anatomies and subtotal occlusions; Diagnostic steel guide wires 0.038" and 0.035" (fixed-core / movable core for various wire diameters); A hydrophilic guide wire; A guide wire Extrastiff / Superstiff; A guide wire for arteries that cannot be easily accessed with an included Torque device; Guide wires with diameter 0.025", with a soft tip and stiff body; A wire for coronary balloon catheter for chronic total occlusions; Femoral puncture needles (18G); A pressure tube made of flexible polyurethane; Angiographic syringes for contrast; Angiographic MANIFOLDS, with 2 or 3 ports; An inflation pump with a manometer and working pressure of up to 30atm; A graft system for acute perforations and ruptures of coronary and infrapopliteal arteries; A syringe for contrast compatible with Illumena injector, or an equivalent; A radial band for hemostasis after radial access; A SET for closed pericardiocentesis; Cuffs with a pump for flushing an invasive pressure monitoring system; A TRANSDUCER (CABLE) with a membrane for measuring invasive arterial pressure; A SET for temporary pacing; Pacemaker connectors; AN ANGIOGRAPHIC STERILE SET; Sterile surgical gloves, lightly powdered - sizes 7.0 - 8.5; A catheter for intravascular ultrasound compatible with Intravascular imaging system -iLAB IVUS, or an equivalent; Diagnostic catheters TRA for transradial access, with a wide range of curves that can be used for cannulation of both coronary arteries; A microcatheter for CTO, for antegrade access (135 cm or longer) and retrograde access (150 cm or longer), with an internal diameter of the catheter - proximal 0.018”, distal 0.015”, featuring a tapered tip visible along its entire length; A microcatheter with lengths of 135 cm (or longer) and 150 cm (or longer); reinforced catheter body with 14 braided wires and hydrophilic coating of 70 cm for the 135 cm microcatheter and 85 cm for the 150 cm microcatheter; A microcatheter with a dual lumen, L3 coating, proximal diameter 3.2F, distal diameter 3.3F/2.5F, and tip diameter 1.5F.; Hybrid guide wires for PCI, 0.014", 180 cm length, proximal part made of stainless steel coated with PTFE, distal part made of Nitinol and hydrophilically coated; A guide wire for PCI (0.014"), length range from minimum 190cm to maximum 300cm, with varying support levels for stenting and different tip stiffness, hydrophilic or hydrophobic coating, Nitinol elastinit core, tip weight 0.6 or 0.7 g; A wire specifically designed for removing foreign bodies from blood vessels; An extension for a “guiding“ catheter 6F and 7F; PTCA coronary balloon catheter SC (semi-compliant) for pre-dilatation of a chronic total occlusion, hydrophilic, monorail RX; PTCA coronary balloon catheter NC (non-compliant), intended for pre-dilatation of heavily calcified lesions, preparation of ostial lesions, occlusions within stents - scaffolds, drug-coated balloon, in-stent restenosis; PTCA coronary balloon catheter for NC dilatation, RX, with Hypotube design and PTFE coating, hydrophilic, balloon material Nylon12 or equivalent; PTCA coronary balloon catheter for SC dilatation, RX, with Hypotube design and PTFE coating, hydrophilic; Semi-compliant balloon dilatation catheter, RX catheter, made of polyamide elastomer or equivalent, with hydrophilic coating and P-TECH Hypotube design; A guide wire with an outer diameter of 0.018” (0.46 mm), hydrophilic coated, intended for navigation and crossing tight stenoses in the SFA and infrapopliteal arteries; A guide wire with an outer diameter of 0.014” (0.36 mm), hydrophilic coated, intended for navigation and crossing tight stenoses in infrapopliteal arteries; A balloon catheter for PTCA with Sirolimus on a lipid carrier in the form of micro-reservoirs, maximum drug dose 1 μg/mm2; A coronary drug-eluting PTCA balloon catheter indicated for dilation of de novo stenosis and restenotic lesions in a coronary artery, coated with Paclitaxel; A coronary balloon catheter coated with Paclitaxel (3.5 μg/mm² or more) on a biocompatible urea carrier, allowing rapid drug release within 30-60 seconds; An introducer for PTA procedures of lower extremities; A system for vascular closure (set); A balloon catheter with controlled dilatation for treating chronic total occlusions of peripheral blood vessels below and above the knee; A PTCA balloon with super high pressure; double-layered, for double power; A high-pressure inflation device for inflating balloons with high pressure of up to a maximum of 40/55 bar; A system for chronic total occlusions with directional/linear atherectomy, capable of treating eccentric and irregular lesions; A system for thrombectomy, for acute ischemic stroke, embolus remover in case of complications from carotid stenting; A microcatheter for thrombectomy, hydrophilic coating, and shapeable tip; Hybrid wires 0.014” for interventions of cerebral blood vessels, made of stainless steel and Nitinol, distal hydrophilic coating; A Nitinol guide wire for neurovasculature, with a 2cm gold tip, coated with RO polyurethane with tungsten and hydrophilic coating, 0.012”, 0.014”, 0.016”, 180cm -200cm; A guide catheter with an integrated diagnostic catheter, reinforced with a wire and PTFE layer, radiopaque diagnostic catheter, proximally reinforced, distally soft; A hybrid catheter for distal neurovascular access, 17 - 19 cm distally super-soft segment, kink-resistant, allowing use without guiding, distally hydrophilic; A set for aspiration (cerebral blood vessels) during thromboembolic complications of carotid stenting; Wires for FFR and catheters for OCT (by providing equipment that is free to use)A wire for measuring FFR (fractional flow reserve) and RFR (Resting full-cycle ratio) Intravascular catheter with oscillating optical fiber for imaging OCT