North Macedonia - Angiography supplies - Consumables for interventional cardiology

Consumables for interventional cardiology ANGIOGRAPHY STERILE SET for coronary procedures; Transradial access kit set, which is a sterile single-use set; GUIDE WIRE (min 0.035") (180 cm-260 cm- minimum length range); Guide wires 0.035" to 0.038" super stiff with floppy (soft) tip. With a length range of 180 to 300cm; Hydrophilic Nitinol Guidewires Coated with RO Polyurethane with Tungsten and Hydrophilic Coating 0.018” - 0.038”, 50cm to 260cm. Available in tip shapes: Straight, J, Angled and Double Angled Bolia"; Hydrophilic Nitinol guidewires with tapered tip coated with RO polyurethane with tungsten for visibility and hydrophilic layer along the entire length 0.020" - 0.038”, 80cm - 300cm Available with tip shape Straight, 45° angled, 1.5 mm J shape; Diagnostic catheters, left and right for transfemoral / transradial access, 5F and 6F; "double-braided"; Diagnostic angiographic catheters: coronary, left, right, MP, SIM, PIG TAIL or equivalent, 4 F, "doublebraided"; Diagnostic angiographic catheter double braided SIM 2.3 Inner diameter 0.047” for 5F. Diameters from 4F to 6F, lengths from 100 to 125cm.; Guiding coronary catheters for transfemoral/transradial access size 5-8F; Coronary stent with sinusoidal configuration and permanent polymer coated with cytostatic from the LIMUS family (DES); Coronary stent for the left main artery with a sinusoidal configuration, with a permanent polymer coated with a cytostatic from the LIMUS family (DES),; Coronary PLATINUM-CHROMIUM stent with bioabsorbable polymer coated with cytostatic with antiinflammatory and antiproliferative effects from the LIMUS family - (DES); Coronary stent made of Cobalt Chromium Alloy, non-linear multi-link cell design, coated with permanent polymer and cytostatic everolimus (DES),; Coronary DES COBALT CHROMIUM STENT for complex and bifurcation lesions coated with bioresorbable polymer with cytostatic from the "LIMUS" family; Coronary balloon dilation catheters, semicompliant, with a low profile tip of 0.41mm or 0.016"; SEMICOMPLIANT balloon catheters, available in Rx and OTW technique; Balloon catheters for CORONARY dilation for focal and long lesions, Semi-compliant, with two markers, PEBAX or equivalent material; Low profile NON COMPLIANT balloon catheters, for focal and long lesions, for in-stent and post-dilatation dilation, with two markers; Balloon catheters for STO, hydrophilic coated, with two markers on the balloon and two depth markers on the shaft,; Guidewire for PCI, designed for penetrating technique in chronic total occlusions 'tapperd tip' 0.014”/0/009”(0.23mm/0.36mm); CORONARY MICROCATETER hydrophilic coated with a maximum length of 150 cm, compatible with (0.014”) guide wire, distal outer diameter 1.8 Fr (0.60 mm), proximal outer diameter 2.6 Fr (0.87 mm) With a conical "tapered" lumen coated with PTFE.; Intervention set consisting of a Balloon Pump with an ergonomic handle, working pressure 30 atm, a mechanism for controlling pressure during dilation, an epsilon (Y) connector, an insertion needle, a torquer; Self-expanding carotid NITINOL stent with flexible double-layer micromesh closed cell design; PTA balloon catheter with dual guidewire exchange capability, fast and full length, low profile up to 1.02mm tip profile; Hybrid hydrophilic guidewires with extra-stiff Nitinol body with PTFE helix for passage through complex lesions and atraumatic hydrophilic distal section of 25cm; Hydrophilic guiding introducers with stainless steel, spiral with greater support and PTFE inner layer, 5F -8F, 45cm-90cm length range, hydrophilic part 5-35cm; Hybrid guidewires for PCI, 0.014", 180 cm long, proximal part made of stainless steel; Peripheral support catheter with hydrophilic coating on the distal 40cm, with steel mesh in the wall, with 4 platinum-iridium radiopaque markers at the tip and every 5cm; Self-expanding nitinol stent: with the so-called three wave open cell design; Balloon catheter peripheral, coated with Paclitaxel drug for de novo or lesions with restenosis, "OTW technique"; Peripheral STEN GRAFT SYSTEM balloon expandable, indicated for interventions in renal and iliac arteries; Coronary stent constructed from Cobalt-Chromium alloy, open cell design with biodegradable polymer coated with immunosuppressive drug sirolimus; Hybrid catheter for distal neurovasculature access, 17 cm - 19 cm distal supersoft section, kink-resistant; Coronary balloon catheter coated with Paclitaxel on a biocompatible urea carrier, which allows rapid drug release within 30-60s, platinum-iridium markers, balloon diameter 2-4mm and balloon length 10-30mm; OTW peripheral artery balloon catheter consisting of a balloon and a nitinol cage, for controlled PTA; Balloon catheters for peripheral arteries, -OTW technique, hydrophilic coating, “dual lumen shaft”, compatible with 0.035'' wires; Coronary DES COBALT CHROMIUM stent, MULTI-LINK design, 3-3-3, non linear link, with permanent polymer and EVEROLIMUS cytostatic; Lunderquist Guide Wire (0.035"), Extra Stiff, for complex diagnostic and interventional procedures; Coronary stent made of Cobalt-Chromium alloy, coated with the drug ''umirolimus'' (semi synthetic sirolimus derivative), with biodegradable ''poly lactic acid'' polymer; Coronary stent made of Cobalt-Chromium alloy, abluminally coated with the drug ''umirolimus'' (semisynthetic sirolimus derivative), without polymer and without carrier; Coronary guide wire for chronic total occlusions “tapered tip” 0.011; 0.012”/0.014”, hydrophilic; Coronary guidewire 0.014”, for passage through CTO, hydrophilic, length 190-300 cm; Coronary guidewire 0.014”, for passage through CTO, hydrophilic, length 200-300 cm; Dual lumen microcatheter with L3 coating, proximal diameter 3.2F, distal diameter 3.3F/2.5F, tip diameter 1.5F; Hydrophilic coronary guidewire 0.014'', stainless steel core, with 1:1 tip response for standard procedures, tortuous anatomies and subtotal occlusions; Hydrophilic guide wire for PCI- tip Style- Core-To-tip material -Durasteel- stainless steel with full polymer (Cover type) from core to tip; Balon peripheral artery catheter OTW, made of nylon, coated with POLIGRADE coating, with Paclitaxel drug (concentration 2.5 μg/mm2); Hydrophilic guide wire Durasteel-stainless steel, hydrophilicity in length of 20-30cm with polymer sleeve; Balloon catheters for CORONARY dilation for focal and long lesions, for in-stent and post-dilatation dilation, Rx technique, non-compliant, with two markers, PEBAX or equivalent material,; CORONARY STENT made of Cobalt Chromium Alloy, multi-link - Peak to Valley stent design, for the treatment of tapered (conical) narrowed coronary lesions with small and large diameters