Aller au contenu
Aperlena

Allemagne - Travaux de construction de centrales électriques et de chauffage - REB, Lot 4c : deux transformateurs de réseau 400/110kV (300 MVA) et Lot 4d : deux transformateurs de distribution 110/22,5kV (125 MVA), projet Reuter Electrical Backbone

Original Germany - Construction works for power plants and heating plants - REB, Lot 4c: two 400/110kV grid transformers (300 MVA) and Lot 4d: two distribution 110/22.5kV transformers (125 MVA), Projekt Reuter Electrical Backbone

Ouvert Avis de marché Aucune date limite publiée
Suivre ce marché

Nous vous écrivons si la date limite change ou si un rectificatif est publié. Gratuit. Se connecter

Le Verdict Aperlena

Course ouverte

Aucun fournisseur ne domine : 3 entreprises différentes ont remporté les 3 derniers marchés comparables de cet acheteur en 5 ans. Une course réellement ouverte.

0%
Prix final attendu par rapport à l'estimation publiée

Sur la base de 3 attributions comparables de cet acheteur dans ce secteur sur 5 ans. Chaque verdict est consigné avant le résultat et confronté à l'avis d'attribution. Comment nous nous notons.

Résumé

Résumé généré automatiquement

L'acheteur procure deux lots dans le cadre du projet Reuter Electrical Backbone (REB) à la centrale de cogénération Reuter West à Berlin, en Allemagne. Le lot 4c comprend la planification, la livraison, l'installation, la mise en service et la formation produit pour deux transformateurs de réseau 400/110kV (300 MVA) avec systèmes de refroidissement ONAN/ONAF, ainsi que deux systèmes de surveillance de transformateurs connectés selon la norme IEC 61850. Le lot 4d comprend la planification, la livraison, l'installation, la mise en service et la formation pour deux transformateurs de distribution 110/22,5kV (125 MVA) avec refroidissement, reliant une chaudière à électrodes de 120 MW au réseau de distribution interne BEW. Les armoires de protection et de commande sont exclues du lot 4c. Le projet est attribué par appels d'offres à l'échelle de l'UE en 9 lots. Aucune valeur estimée ni date limite n'est indiquée dans l'avis.

Description

The Reuter Electrical Backbone (REB) project involves the transformation of the electrical system at the Reuter site. The REB project will be implemented within the framework of EU-wide tenders in 9 lots. [Further project details are available in the appendix.] Subject of this notice are lot 4c and 4d. Lot 4c: The scope of delivery and services for Lot 4c includes the planning, delivery, installation, commissioning and product training of two 400/110kV grid transformers with associated ONAN/ONAF cooling systems for connecting the REB substation to the 380kV network of 50Hertz (location: Reuter West combined heat and power plant, Berlin). U = 400/110kV ± 13 x 1,23% S = 300MVA (360MVA) Uk =16% YNyn0 400kV - open air 110kV - open air The two grid transformers will be installed on designated foundations in open transformer boxes in the southern area of the Reuter Electrical Backbone (REB) building. The scope of delivery and services also includes two ETOS or equivalent transformer monitoring systems for recording the most important parameters (including comprehensive gas analysis, monitoring of the 400kV bushings, recording of current and voltage, etc.), including their connection to the station control system (IEC 61850). In addition to planning, delivery, on-site installation and product training, the contractor is also responsible for the cold and warm commissioning of the network transformers, including all supplied auxiliary systems and components. The secondary technology components (protection and control cabinets) are not included in the scope of delivery of this lot. Lot 4d: The scope of delivery and services for Lot 4d includes the planning, delivery, installation, commissioning and product training of two 110/22.5kV distribution transformers, including cooling systems for connecting an electric hot water generator ("E-HWE") (120 MW - electrode boiler system) in the internal BEW distribution network at the Reuter West combined heat and power plant in Berlin. S = 125MVA (150MVA) Yyn10+d** U = 110/22 ± 12 x 1,31% Uk = 12,5% **d - is the tertiary winding responsible for stabilizing the magnetic system. 110kV - cable connection (e.g. Pfisterer or equivalent) 22.5kV - Open-air / air-insulated high-current busbar system (HSS-4000A, manufacturer: EGE or equivalent) The two distribution transformers will be installed on designated foundations in open transformer boxes on the existing E-HWE building. The 110kV connection on the OS side must be made using 110kV cables. The US-side 22.5kV is to be planned by the contractor for the connection of an air-insulated 24kV high-current busbar system (HSS) from the manufacturer EGE (or equivalent). The connections on both sides (110kV cable and 22.5kV HSS) are not part of the scope of work for lot 4d and will be provided by the customer. The scope of delivery and services also includes two ETOS or equivalent transformer monitoring systems for recording the most important parameters (including comprehensive gas analysis, recording of current and voltage, etc.), including their connection to the station control system (IEC 61850). In addition to planning, delivery, on-site installation and product training, the contractor is also responsible for the cold and hot commissioning of the two distribution transformers, including all auxiliary systems and components supplied. The secondary technical components (protection and control cabinets) are not included in the scope of delivery for this lot. From today's perspective, the following (contractual) dates are planned: Q3/2029: Delivery of the grid and distribution transformers Q1/2030: Installation of the transformers Q2/2030: Connection of the transformers to the primary technology. Q3/2030: Commissioning is planned in two stages: - 380/110kV grid transformers - 110/22.5kV distribution transformers Applications can be submitted individually or in combination.

Source officielle

Source : TED - Tenders Electronic Daily (Publications Office of the EU)

Vérifiez toujours les détails dans l'avis officiel.

Dernière vérification auprès de TED - Tenders Electronic Daily (Publications Office of the EU) il y a 1 mois

Plus de cet acheteur

Profil complet de l'acheteur

50 marchés ouverts actuellement

Qui remporte habituellement les marchés de cet acheteur dans ce secteur

Entreprise Attributions Montant total attribué Dernière attribution
Berger Bau SE 1 n/d janv. 2026
Caliqua AG 1 n/d févr. 2026
Siemens Energy Global GmbH & Co. KG 1 n/d juin 2026

Sur la base de 3 attributions avec un profil d'entreprise associé au cours des 5 dernières années.

Ce que cet acheteur a paye jusqu'ici

Sur la base de 4 marches comparables attribues par cet acheteur dans ce secteur ces 4 dernieres annees.

1 €
Premier quartile
1 €
Montant median
€35,0M
Troisieme quartile

Attributions recentes

Montants attribues tels que publies par les sources officielles. A titre indicatif : le perimetre, les lots et la duree varient d'un marche a l'autre.

Historique des modifications

Chaque republication de cet avis par une source officielle avec un contenu différent. Nous surveillons toutes les sources que nous indexons, y compris les copies régionales du même avis.

  1. A lire avant de repondre
    • Valeur estimée: Fixé à 1 €

Suivez ce marche et nous vous ecrivons dès qu'il change. Créer un compte

Marchés similaires

1

jour restant

Cloisons mobiles

Allemagne Travaux de construction Handwerkskammer Ostwestfalen-Lippe zu Bielefeld

1

jour restant

Parois de séparation pour WC

Allemagne Travaux de construction Handwerkskammer Ostwestfalen-Lippe zu Bielefeld

Contexte de marché

Appel ouvert moyen · Travaux de construction
31 233 700 €
25 658 ouverts en Europe actuellement
Historique de l'acheteur sur Aperlena
66 avis suivis · 15 attribués
143 672 999 € de contrats attribués

Ne manquez plus aucun marché comme celui-ci

1 786 nouveaux avis pour Travaux de construction en Allemagne au cours des 7 derniers jours. Recevez un e-mail quand de nouveaux avis paraissent. Gratuit.

Créer mon alerte

Raccourcis clavier

Parcourir une liste sans toucher la souris. Les raccourcis restent inactifs pendant la saisie dans un champ.

j
Résultat suivant
k
Résultat précédent
Entrée
Ouvrir le résultat
n
Page suivante
p
Page précédente
c
Comparer ce résultat
s
Ajouter ce résultat à la présélection
/
Aller au champ de recherche
?
Afficher ces raccourcis
Échap
Fermer