Saltar al contenido
Aperlena
Idioma:

Alemania - Servicios de consultoría empresarial y de gestión y servicios afines - 10004174 - Apoyo de ingeniería para el desarrollo de hasta tres plantas piloto PtL en hasta tres países

Original Germany - Business and management consultancy and related services - 10004174 - Engineering support for the development of up to three PtL pilot plants in up to three countries

Abierta Anuncio de licitación Sin fecha límite publicada
Vigilar esta licitación

Te escribimos si cambia el plazo o se publica una corrección. Gratis. Iniciar sesión

El Veredicto Aperlena

Carrera abierta

Ningún proveedor domina: 28 empresas distintas se han llevado los últimos 36 contratos comparables de este comprador en 5 años. Es una carrera realmente abierta.

Basado en 36 adjudicaciones comparables de este comprador en este sector durante 5 años. Cada veredicto se registra antes del resultado y se contrasta con el anuncio de adjudicación. Cómo nos puntuamos.

Resumen

Resumen generado automáticamente

La GIZ, que implementa el International Power-to-X Hub por encargo del Ministerio Federal alemán de Medio Ambiente (BMUKN), con financiación de la Iniciativa Climática Internacional, contrata apoyo de ingeniería para el desarrollo de hasta tres plantas piloto PtL (Power-to-Liquid) en hasta tres países. El comprador es la GIZ, con sede en Alemania. El proyecto promueve soluciones Power-to-X sostenibles para sectores difíciles de descarbonizar, como la aviación, el transporte marítimo y las industrias intensivas en energía, y se basa en trabajos previos con socios públicos en Marruecos, Sudáfrica, Kenia y Argentina. No se indica en el anuncio ningún valor estimado, plazo de presentación ni procedimiento específico.

Descripción

The International Power-to-X Hub is implemented by Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN) and is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. The International Power-to-X Hub supports the transition to climate-neutral industries and economies by promoting sustainable Power-to-X solutions where direct electrification is not yet feasible, especially in hard-to-abate sectors such as aviation, maritime transport, and energy-intensive industries. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and is therefore a key instrument for replacing fossil-based inputs in sectors including chemicals, fertilisers, steel, cement, aviation, and shipping. The project is based on the understanding that renewable electricity must be used directly wherever possible and that Power-to-X should be applied specifically in areas where no more efficient decarbonisation option is currently available. The PtX Hub has already supported partner countries in developing allocation scenarios for hydrogen and other PtX products, including related value chain analyses. Current and previous activities have been carried out with public-sector partners in Morocco, South Africa, Kenya and Argentina, as well as in other countries of the Global South. At the same time, the International Power-to-X Hub recognises the major development opportunities associated with sustainable PtX markets, particularly for countries with strong renewable energy potential, which can reduce dependence on fossil fuel imports, lower emissions, build new value chains, and position themselves in emerging international markets for climate-neutral fuels and products. A central principle of the project is that sustainability must guide market development from the outset. Power-to-X is only climate-compatible when based on renewable electricity and robust environmental and social standards across the value chain, supported by appropriate certification systems and reliable investment conditions. To date, the PtX Hub has helped identify concrete business cases and derive recommendations for improving regulatory frameworks for sustainable PtX markets. These activities are intended to support pilot-scale implementation and prepare partner countries for the future domestic use and export of electricity-based sustainable fuels. Working with public and private sector partners, we aim to accelerate practical, country-specific pathways towards the production and use of sustainable hydrogen derivatives, e-fuels, and other PtX products, thereby contributing to global climate goals and long-term sustainable economic transformation. The International Power-to-X Hub supports the transition to climate-neutral industries and economies by advancing sustainable Power-to-X solutions in sectors where direct electrification is not yet feasible, especially aviation, maritime transport and energy-intensive industries. The project is implemented by Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN). It is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and therefore helps replace fossil-based inputs while supporting climate protection, industrial transformation and sustainable economic development. The subject of this tender is providing technical support for the development of up to three Power-to-Liquid pilot plants in up to three countries. The assignment provides up to three industrial partner companies with customised engineering documents and advisory services to advance PtL pilot plant projects to FEED/EPC tendering stage. The requested services cover the full project development pathway from concept definition and selection through comparative techno-economic feasibility assessment and conceptual engineering to advice on procurement and tender strategy and, where required, support for the preparation of functional FEED/EPC tender documents. The contract is structured into four work packages in two implementation steps. In Work Packages A and B, the contractor shall review existing concepts and documentation, consult each partner, refine or propose PtL plant concepts, advise on feedstock and utility sourcing, process technologies, offtake markets, regulation and certification, conduct kick-off meetings and site visits, and prepare Concept and Site Analysis Reports with comparative assessments and recommendations. The contractor shall also deliver partner trainings and prepare comparative techno-economic feasibility studies for up to two plant concepts per partner, including a book of assumptions, process simulation, technical descriptions, preliminary process flow diagrams, equipment sizing, interface definitions, certification compliance assessment, CAPEX and OPEX estimates, economic modelling, risk analysis and concept recommendations. Preliminary results shall be discussed with each partner in an interactive workshop to validate assumptions, review trade-offs and support concept selection. Subject to confirmation by the partner and GIZ, Work Package C covers FEL-2 conceptual engineering for the selected concept and a refined Class 4 AACE cost estimate. This includes advisory support on site development, permitting and certification, preparation of an integrated project execution plan, partner trainings on PtL process simulation and plant engineering, and an FEL-2 engineering package comprising Basis of Design specifications, process descriptions, drawings, equipment lists, preliminary equipment specifications, interface and battery limit definitions, input and output specifications, and QA/QC and HSE requirements. The engineering work shall be carried out in close coordination with the partner and GIZ and shall include advice on technology and licensor options as well as updated CAPEX estimates, economic models and key project indicators. Where sustainable CO2 supply is not readily available, the services may also include, for one project, the screening of potential sustainable carbon sources and the design of a CCU system including FEL-1 engineering package and CAPEX assessment. In a subsequent stage, the contractor shall advise on FEED/EPC procurement and tender strategy and, where required, prepare the functional tender specifications, including design basis, technical and performance specifications, scope of supply and services, site and utility information, HSE and QA/QC requirements and project schedule elements in line with the partner"s procurement framework and international standards. The contractor shall also provide advice on commercial and legal terms during tender preparation. For one partner, the services may further include support during the FEED/EPC tendering process, including bidder communication, clarification support, qualification and bid evaluation assistance, preparation of evaluation notes and support during negotiations. Throughout implementation, the contractor shall also provide cross-cutting knowledge exchange, monitoring, reporting, backstopping and coordination services.

Fuente oficial

Fuente: TED - Tenders Electronic Daily (Publications Office of the EU)

Verifica siempre los detalles en el anuncio oficial.

Última verificación con TED - Tenders Electronic Daily (Publications Office of the EU) hace 1 mes

Ver el anuncio oficial

Más de este comprador

Perfil completo del comprador

105 licitaciones abiertas ahora mismo

Quién suele ganar los contratos de este comprador en este sector

Empresa Adjudicaciones Importe total adjudicado Última adjudicación
GFA Consulting Group GmbH 5 804.320 € ago. 2026
GOPA Consultants 4 €1,9M jun. 2026
CEFE Formation & Certification 2 273.485 € jul. 2026
Luvent Consulting 1 €2,5M ene. 2026
Bidding consortium Luvent Consulting GmbH (leading) / Chemonics International, Inc. 1 €1,8M jul. 2026

A partir de 36 adjudicaciones con perfil de empresa vinculado en los últimos 5 años.

Lo que este comprador ha pagado antes

A partir de 14 contratos comparables adjudicados por este comprador en este sector en los ultimos 4 anos.

360.201 €
Cuartil inferior
898.523 €
Importe mediano
€1,7M
Cuartil superior

Adjudicaciones mas recientes

Importes de adjudicacion segun los publican las fuentes oficiales. Uselos como guia, no como regla: el alcance, los lotes y la duracion varian entre contratos.

Historial de cambios

Cada vez que una fuente oficial ha vuelto a publicar este anuncio con contenido distinto. Vigilamos todas las fuentes que indexamos, incluidas las copias regionales del mismo anuncio.

  1. Léelo antes de presentarte
    • Objeto y criterios: Se ha ampliado la descripción. Reléela antes de presentarte.

Sigue esta licitación y te escribimos en cuanto cambie. Crear cuenta

Licitaciones similares

Contexto de mercado

Licitación abierta media · Servicios empresariales
19.002.329 €
6.626 abiertas ahora en Europa
Historial del comprador en Aperlena
477 anuncios registrados · 205 adjudicados
55.226.094 € en contratos adjudicados

No te pierdas ninguna licitación como esta

125 anuncios nuevos de Servicios empresariales en Alemania en los últimos 7 días. Recibe un email cuando aparezcan anuncios nuevos. Gratis.

Crear mi alerta
Fuente

Atajos de teclado

Recorre una lista sin tocar el ratón. Los atajos no actúan mientras escribes en un campo.

j
Resultado siguiente
k
Resultado anterior
Intro
Abrir el resultado
n
Página siguiente
p
Página anterior
c
Comparar este resultado
s
Añadir este resultado a la lista corta
/
Ir al cuadro de búsqueda
?
Mostrar estos atajos
Esc
Cerrar